Many questions about the Staging and Imaging and its application in our vehicles. Actually what is staging and imaging? This time, let's peel one by one in this article. Note This paper is devoted to the staging and imaging in the context of everyday and not in the context of the contest and others.
Staging can be defined as the place where the musicians play the music for the concert stage, in the recording studio, in the pub, restaurant and more. There is a derivation of the staging is to take the high stage (stage height), the width of the stage (stage width) and it stage (stage depth).
The bottom line the stage depends on the acoustic conditions where he recorded (ambience) and influenced also by the acoustics of the recording venue reproduced. Many systems are capable of producing a great tonal accuracy but fail in reproducing the recordings of ambience. What is the cause?
The Acoustics, acoustics play a role when sound reproduction is produced for example the recording of the choir girls 35 song in the Cathedral Westminter Abbey that physically has a stage width of 45 metres, stage height 15 meters and stage depth ranging from the soprano to alto backmost 9 meters and the distance to the microphone recording approximately 6 metres.
It will be hard pressed to be perfectly reproduced in the car that the pillar distance pillar width e.g. only 1 meter in height 1,4 m and it is only 0,4 meters. So it is necessary carefully planning and the use of quality tools for approaching its reproduction original condition.
Imaging is the position of each of the singers on the stage of clear and tangible example of the lead singer of accompaniment in the middle on the left, to the right of the organ. So imaging is the content or content that we hear voices on stage. Here it was clear that between the Staging and Imaging are actually intertwined, which is often both of these things are often juxtaposed.
Well what you can do is reproduce proportionately by performing the installation and setting of carefully.
Generally with the help of first-class installation techniques, audio devices, positioning and angling are accurate x-over, cutting, and assisted with special device a sort of equalizer and or DSP (Digital Sound Processor) then the staging and imaging can be reproduced at least approaching even though it could not be 100 percent perfect with sound original.
Now how to get the staging and imaging in a step by step? Here are a few tips that can be done.
1. Choose a car with a dashboard and an average width of the contour, as much as possible the type single cabin such as MPV or SUV (but not that of the sedan could not challenge only larger). Point to get the width of the pillar to pillar that is ideal and it dashboard for positioning and angling is ideal.
ect are meticulous and patient enough in doing comprehensive setting.
2. Installation and setting in the installer is experienced and is willing to work on this project
3. Attach the silencer with either on the ground floor, ceiling, doors, hood, including mudguards with and dashboard. Do this carefully so that road noise, engine noise and mechanical noise can be reduced as low as possible.
4. Select Head Unit, Power, Speakers including the processor that has the distortion and noise as small as possible so that the results are more predictable.
5. Frequent auditions live concert recording of the CD and use live version as a comparison.
6. Speaker Placement, attach the midbass, midrange speakers and tweeters on adjacent positions and try to have a path length difference of different thin between the left and right speakers. Some of the cars I have seen using the kick panel for entries but this. But the ideal stage for high then we recommend the tweeter is mounted as high as ears. For that experiment is the key!
7. Setting the Tonal Balance ahead of time don't rush in pursuit of the staging and imaging. Believe me a balanced tonal balance will help generate an accurate staging and imaging. If using the eq then use eq with independent channel with a number of bands that much in order to resolve the problem at certain frequencies either peak or dip.
8. Crossover Settings either passively or actively, with a planned experiment, use the most optimal truncation points based on the specifications of the speakers. Special attention should be made on the different brands and speaker series.
9. Use the time alignment (if using the processor) carefully, measure carefully and strive for stable focus in the middle of the stage. Focus on balanced-sounding voices in a single listening position seat position or two seats (dual listening position).
10. make a note of all the process and repeat if there were flaws in the process.
Moreover do not forget that the Staging and Imaging voice of the ideal is not impressed, phasey and as contrived. She should be created with the impression of a strong platform and image intact. Well good luck !
Staging can be defined as the place where the musicians play the music for the concert stage, in the recording studio, in the pub, restaurant and more. There is a derivation of the staging is to take the high stage (stage height), the width of the stage (stage width) and it stage (stage depth).
The bottom line the stage depends on the acoustic conditions where he recorded (ambience) and influenced also by the acoustics of the recording venue reproduced. Many systems are capable of producing a great tonal accuracy but fail in reproducing the recordings of ambience. What is the cause?
The Acoustics, acoustics play a role when sound reproduction is produced for example the recording of the choir girls 35 song in the Cathedral Westminter Abbey that physically has a stage width of 45 metres, stage height 15 meters and stage depth ranging from the soprano to alto backmost 9 meters and the distance to the microphone recording approximately 6 metres.
It will be hard pressed to be perfectly reproduced in the car that the pillar distance pillar width e.g. only 1 meter in height 1,4 m and it is only 0,4 meters. So it is necessary carefully planning and the use of quality tools for approaching its reproduction original condition.
Imaging is the position of each of the singers on the stage of clear and tangible example of the lead singer of accompaniment in the middle on the left, to the right of the organ. So imaging is the content or content that we hear voices on stage. Here it was clear that between the Staging and Imaging are actually intertwined, which is often both of these things are often juxtaposed.
Well what you can do is reproduce proportionately by performing the installation and setting of carefully.
Generally with the help of first-class installation techniques, audio devices, positioning and angling are accurate x-over, cutting, and assisted with special device a sort of equalizer and or DSP (Digital Sound Processor) then the staging and imaging can be reproduced at least approaching even though it could not be 100 percent perfect with sound original.
Now how to get the staging and imaging in a step by step? Here are a few tips that can be done.
1. Choose a car with a dashboard and an average width of the contour, as much as possible the type single cabin such as MPV or SUV (but not that of the sedan could not challenge only larger). Point to get the width of the pillar to pillar that is ideal and it dashboard for positioning and angling is ideal.
ect are meticulous and patient enough in doing comprehensive setting.
2. Installation and setting in the installer is experienced and is willing to work on this project
3. Attach the silencer with either on the ground floor, ceiling, doors, hood, including mudguards with and dashboard. Do this carefully so that road noise, engine noise and mechanical noise can be reduced as low as possible.
4. Select Head Unit, Power, Speakers including the processor that has the distortion and noise as small as possible so that the results are more predictable.
5. Frequent auditions live concert recording of the CD and use live version as a comparison.
6. Speaker Placement, attach the midbass, midrange speakers and tweeters on adjacent positions and try to have a path length difference of different thin between the left and right speakers. Some of the cars I have seen using the kick panel for entries but this. But the ideal stage for high then we recommend the tweeter is mounted as high as ears. For that experiment is the key!
7. Setting the Tonal Balance ahead of time don't rush in pursuit of the staging and imaging. Believe me a balanced tonal balance will help generate an accurate staging and imaging. If using the eq then use eq with independent channel with a number of bands that much in order to resolve the problem at certain frequencies either peak or dip.
8. Crossover Settings either passively or actively, with a planned experiment, use the most optimal truncation points based on the specifications of the speakers. Special attention should be made on the different brands and speaker series.
9. Use the time alignment (if using the processor) carefully, measure carefully and strive for stable focus in the middle of the stage. Focus on balanced-sounding voices in a single listening position seat position or two seats (dual listening position).
10. make a note of all the process and repeat if there were flaws in the process.
Moreover do not forget that the Staging and Imaging voice of the ideal is not impressed, phasey and as contrived. She should be created with the impression of a strong platform and image intact. Well good luck !
